English
chengli2
Ihe onyonyo igwe onyonyo 3D na-atụgharị n'akwụkwọ ntuziaka
  • Ndị na-emepụta microscope vidiyo 3D ntuziaka
  • Ndị na-emepụta microscope vidiyo 3D ntuziaka

Ndị na-emepụta microscope vidiyo 3D ntuziaka

Nkọwa dị mkpirikpi:

NkeMikroskopu vidiyo na-atụgharị 3Datụmatụ ọrụ dị mfe, mkpebi dị elu, na nnukwu nlele anya.Ọ nwere ike nweta mmetụta oyiyi 3D, ma nwee ike ịhụ ịdị elu ngwaahịa, omimi oghere, wdg site n'echiche dị iche iche.


Nkọwa ngwaahịa

Mkpado ngwaahịa

CLT-332VSMikroskopu vidiyo na-atụgharị 3D

Atụmatụ:
Igwe ihe nkiri vidiyo na-atụgharị 3D na-egosipụta ọrụ dị mfe, mkpebi dị elu, yana nnukwu nlele anya.Ọ nwere ike nweta mmetụta oyiyi 3D, ma nwee ike ịhụ ịdị elu ngwaahịa, omimi oghere, wdg site n'echiche dị iche iche.A na-ejikarị ya na ngwa elektrọnik, bọọdụ sekit PCB, ngwaike na ụlọ ọrụ ndị ọzọ.

Nkọwa nka na ụzụ:
● Mgbanwe mbugharị: 0.6X～5.0X
● Oke mbugharị: 1: 8.3
●Kachasị elu keukwu: 25.7X～214X (Philips 27" nyochaa)
● Mpaghara ebumnuche ebumnuche: Min: 1.28mm × 0.96mm, Max: 10.6mm × 8mm
●Nleba anya: ụgbọelu, 45° akụkụ
● Mpaghara ụgbọ elu nke ogbo: 300mm × 300mm (nwere ike ịhazi ya)
● N'iji ịdị elu nke etiti nkwado (ya na modul nke ọma): 260mm
●CCD (ya na njikọ 0.5X): 2 nde pikselụ, 1/2 "Sony mgbawa, HDMI mmepụta nkọwa dị elu
● Ebe ìhè: 6-mgbanaka 4-mpaghara LED ìhè elu
● Ntinye voltaji: AC220V ka DC12V
●Nhọrọ: LED ala ìhè, nha software

  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa